How do I install the TERK FM+ Indoor FM Antenna?
I just purchased the TERK FM+ Indoor FM Antenna and I'm not sure how to install it. Can you provide step-by-step instructions on how to set it up?
Installing the TERK FM+ Indoor FM Antenna is a simple process. Here are the step-by-step instructions:
1. Determine the type of connection your tuner or receiver supports. The TERK FM+ antenna offers two connecting options: a 75 Ohm coaxial connection and a 75 Ohm push-button connection.
2. If your tuner or receiver has a 75 Ohm coaxial input, use the slip-on coaxial connector on the FM lead of the antenna. Simply connect the coaxial cable to the coaxial input on your device.
3. If your tuner or receiver has a 75 Ohm push-button input, use the provided 75 Ohm matching transformer. Connect one end of the coaxial cable to the matching transformer and the other end to the push-button input on your device.
4. Once the antenna is connected to your tuner or receiver, position it for optimal reception. The TERK FM+ antenna can be placed on shelves or wall-mounted. Experiment with different locations to find the best reception.
5. Finally, tune your tuner or receiver to an FM radio station and adjust the position of the antenna if needed to improve reception.
If you encounter any difficulties during the installation process, you can contact TERK's customer service helpline for assistance. They will be able to provide further guidance and support.
Answer this question
Answers are reviewed before publication.