How do I connect the EliteProjector MGFU-S1-FBA to my laptop?
I have a Windows 10 laptop and I tried connecting it to the projector using an HDMI cable, but the projector says "searching input" and my laptop doesn't detect anything. What should I do?
To connect the EliteProjector MGFU-S1-FBA to your Windows 10 laptop, please follow these steps:
1. Make sure the projector and laptop are both powered on.
2. Connect one end of the HDMI cable to the HDMI port on your laptop.
3. Connect the other end of the HDMI cable to the HDMI input port on the projector.
4. On your laptop, press the Windows key + P to open the display settings.
5. Select "Duplicate" or "Extend" to display the laptop screen on the projector.
6. If the projector still shows "searching input" and your laptop doesn't detect anything, try the following troubleshooting steps:
a. Make sure the HDMI cable is securely connected to both the laptop and projector.
b. Press the "Input Source Selection" button on the projector or remote control to manually select the HDMI input.
c. Check the display settings on your laptop to ensure the correct display output is selected.
d. Try using a different HDMI cable or a different HDMI port on your laptop.
e. Restart your laptop and try connecting again.
If you are still experiencing issues, please refer to the EliteProjector MGFU-S1-FBA user guide for further troubleshooting steps or contact your local retailer or service center for assistance.
Answer this question
Answers are reviewed before publication.