How do I install the outrigger feet and spikes on the ELAC DFR52 Debut Reference Floorstanding Speaker?
To install the outrigger feet and spikes on the ELAC DFR52 speaker, follow these steps:
1. Turn the speaker upside down onto a soft surface to prevent scratching or damaging the cabinet.
2. Attach the outrigger feet using the provided machine screws. Align the holes on the feet with the corresponding holes on the bottom of the speaker cabinet and tighten the screws securely.
3. xxxx in the spikes into the bottom of the outrigger feet. If you have hard wood or tile floors, use the provided floor discs before screwing in the spikes.
4. Use the supplied allen wrench to adjust the height of the spikes until the speaker sits level and all four spikes are touching the floor.
5. Once the speaker is level, use the supplied covers to lock the spikes into place.
Please note that it is recommended to have a second person assist with this process to ensure the speaker is handled safely.
Answer this question
Answers are reviewed before publication.