Can this amplifier be used directly with a magnetic cartridge in a record player, or does it need a pre-amp?
I have a record player with a magnetic cartridge and I'm wondering if I can connect it directly to this amplifier without the need for a separate pre-amp.
No, this amplifier is not matched for a magnetic cartridge and does not have enough gain to properly amplify the signal from a record player. You will need a separate phono pre-amp to connect your record player to this amplifier. The phono pre-amp will boost the signal from the cartridge to a level that can be properly amplified by the amplifier. Make sure to connect the output of the phono pre-amp to one of the analog inputs on the amplifier using an appropriate audio cable. Refer to the instruction manual for more information on connecting audio sources to the amplifier.
Answer this question
Answers are reviewed before publication.