How do I change the image on the B. toys BX1888Z Projector Flashlight?
I have tried sliding the reel switch, but the image on the projector flashlight remains the same. I want to know if there is a way to change the image to something different.
To change the image on the B. toys BX1888Z Projector Flashlight, follow these steps:
1. Press the button labeled "Press here to release the reel" located on the side of the flashlight.
2. Slide out the current image reel from the designated slot.
3. Choose a different image reel from your collection or purchase additional reels if available.
4. Align the new image reel with the projector slot, making sure it fits properly.
5. Push the reel all the way in until it clicks into place.
6. Slide the reel switch to the desired mode (solar system or alien visitors).
7. Turn on the flashlight by sliding the switch to the ON position.
8. Adjust the focus ring until the new image appears clear and sharp.
Note: The B. toys BX1888Z Projector Flashlight typically comes with a set of fixed images that are pre-installed in the projector lens. Changing the images may require swapping out the lens or projector disc, which may not be possible with this particular model. Please refer to the product manual or contact customer support for further assistance.
Answer this question
Answers are reviewed before publication.