How do I pair the remote control with the XINGRUI Q69 Remote Control Truck?

To pair the remote control with the XINGRUI Q69 Remote Control Truck, please follow these steps:

1. Ensure that both the remote control and the truck are turned off.
2. Insert the necessary batteries into the remote control, making sure they are inserted correctly.
3. Turn on the remote control by pressing the power button.
4. Insert the 3.6V 800mAh battery into the truck's battery compartment, ensuring it is firmly inserted.
5. Turn on the truck by pressing the power button.
6. The remote control and the truck should automatically establish a 2.4GHz frequency pair.
7. To test if the pairing is successful, press any button on the remote control and check if the truck responds accordingly.
8. If the truck does not respond, try turning off both the remote control and the truck, then repeat steps 3 to 6.

Please refer to the "Setup Guide" section of the XINGRUI Q69 Remote Control Truck User Manual for more detailed instructions and illustrations.