How do I pair the Kromen 5689 Wireless Bluetooth Aux Adapter with my device?

While specific documentation for the Kromen 5689 is currently limited, most Bluetooth Aux adapters follow a standard pairing procedure. Please try the following steps:

1. Power On: Press and hold the power/multifunction button for 3-5 seconds. You should see an LED indicator light begin to flash (usually red and blue) to indicate it is in pairing mode.
2. Enable Bluetooth: Open the Bluetooth settings on your smartphone or device and ensure Bluetooth is turned on.
3. Search for Devices: Look for a device named "5689" or "Kromen" in the list of available devices.
4. Connect: Select the device name to pair. Once connected, the LED light on the adapter will typically stay solid or flash slowly.
5. Audio Connection: Plug the 3.5mm aux connector of the adapter into the AUX-IN port of your car stereo or speaker system.

If these steps do not work, please check if the device requires a specific charging state before first use, as many adapters will not enter pairing mode if the battery is critically low.