How do I set up the Farm Innovators BD-75 3-in-1 Heated Birdbath?

Accepted answer manuals.plus 2024-12-25 06:53:00

To set up the Farm Innovators BD-75 3-in-1 Heated Birdbath, follow these steps:

1. Choose the desired configuration: ground bath, elevated bath, or flat dish.
2. Attach the Deck Mount piece (Figure A) to a 2”x 4” railing, 2”x 6” railing, or 4” x 4” post using screws. Alternatively, attach the Clamp Mount piece (Figure B) to a horizontal top or bottom deck rail. If using the ground bath configuration, attach the Ground Mount pieces (Figure C) and place the birdbath on the ground or a solid surface.
3. Place the basin/ring assembly onto the unit and ensure it is level.
4. Run a fully grounded outdoor extension cord to the unit.
5. Fill the Heated Birdbath with water and clean it periodically.
6. The Heated Birdbath can be used year-round.
7. Enjoy your Heated Birdbath!

For more detailed instructions and illustrations, please refer to the Farm Innovators BD-75 3-in-1 Heated Birdbath Instructions Manual.