Questions manuals.plus asks 2024-12-24 12:07:00

How do I charge the VQVYBXN SG-02 USB Rechargeable Engraving Pen?

I just received the VQVYBXN SG-02 USB Rechargeable Engraving Pen and I'm not sure how to charge it. Can you provide step-by-step instructions?
Accepted answer manuals.plus 2024-12-24 12:07:00
VQVYBXN-SG-02-USB-Rechargable-Engraving-Pen-product
To charge the VQVYBXN SG-02 USB Rechargeable Engraving Pen, follow these steps:

1. Take the USB charging cable that came with the pen.
2. Connect one end of the USB cable to the charging port on the engraving pen.
3. Plug the other end of the USB cable into a USB power source, such as a computer, power bank, or wall adapter.
4. The battery light on the engraving pen will indicate the charging status. It should take approximately 1.5 to 2 hours to fully charge the pen. The battery light will turn on when the pen is fully charged.
5. Once the pen is fully charged, you can disconnect it from the USB power source and start using it for up to 30 minutes of continuous engraving.

Note: It is recommended to fully charge the engraving pen before its first use and to recharge it when the battery is low. You can use the pen while it's charging, but it works best after it's fully charged.
Engraving PenRechargeableSG-02USBVQVYBXN
Open related manual Ask another question
How do I choose the correct bit and speed for different materials like wood and plastic? 1 answer • Choosing the correct bit and speed for your VQVYBXN SG-02 depends on the hardness of the material and the type of work...

Answer this question

Answers are reviewed before publication.