How do I change the light modes on the BINWO BW-Ledf-2P flashlights?
I'm not sure how to switch between the different light modes on the flashlights. Can you provide step-by-step instructions?
To switch between different light modes on the BINWO BW-Ledf-2P flashlights, follow these steps:
1. Make sure the flashlight is turned on by pressing the tail-cap switch.
2. Once the flashlight is on, lightly press the tail-cap switch to cycle through the modes.
3. Each press will switch to the next mode in the following sequence: High, Medium, Low, Strobe, and SOS.
4. Continue pressing the switch lightly until you reach the desired mode.
5. To turn off the flashlight, press and hold the tail-cap switch until the light turns off.
Please refer to the user manual for more detailed instructions and illustrations on operating the BINWO BW-Ledf-2P flashlights.
Answer this question
Answers are reviewed before publication.