How do I set the time on the Learning Resources LER2385 Tock The Learning Clock?
I just purchased the Learning Resources LER2385 Tock The Learning Clock and I'm not sure how to set the time. Can you provide step-by-step instructions?
To set the time on the Learning Resources LER2385 Tock The Learning Clock, follow these steps:
1. Make sure batteries are installed before use. Refer to the Battery Information section in the instruction manual for details on battery installation.
2. Press and hold the HOUR button next to the display screen until the numbers start flashing.
3. Use the HOUR button to advance the hours to the desired time. Press and hold the minute button underneath to advance the minutes. To advance the minutes faster, continue holding the minute button.
4. Once the time is set correctly, the screen will stop flashing and display the time.
5. Press the TIME button, and Tock will announce the correct time.
Note: It is important to ensure that the batteries are properly installed and have enough charge for the clock to function correctly. If you encounter any issues, refer to the troubleshooting section in the instruction manual or contact Learning Resources customer support for assistance.
Answer this question
Answers are reviewed before publication.