How do I switch between the different lighting modes on the BCXYMQ KX3 6400 mAh Bicycle Light?
I recently purchased the BCXYMQ KX3 6400 mAh Bicycle Light and I'm not sure how to switch between the different lighting modes. The user manual mentions that there are multiple modes (high, medium, low, strobe, SOS), but it doesn't provide specific instructions on how to switch between them. Can you please explain the process?
To switch between the different lighting modes on the BCXYMQ KX3 6400 mAh Bicycle Light, follow these steps:
1. Ensure that the light is turned off. If it is currently on, press and hold the power button for 2 seconds to turn it off.
2. Once the light is off, press and hold the power button for 3 seconds. The light will cycle through the available modes, including high, medium, low, strobe, SOS, and off.
3. To select a specific mode, release the power button when the desired mode is illuminated. The red and green lights on the light will flash to indicate the change.
Note: If you want to switch between the 3-mode setting (high, low, strobe) and the 5-mode setting (high, medium, low, strobe, SOS), make sure the light is turned off before performing step 2. Holding down the power button for 3 seconds will toggle between the two settings.
By following these steps, you will be able to switch between the different lighting modes on the BCXYMQ KX3 6400 mAh Bicycle Light and customize the lighting according to your needs.
Answer this question
Answers are reviewed before publication.