How do I pair my Avantree Cyclone BTSP-WP400 Bluetooth Bike Speaker with my phone?
I just purchased the Avantree Cyclone BTSP-WP400 Bluetooth Bike Speaker and I'm not sure how to pair it with my phone. Can you provide step-by-step instructions?
To pair your Avantree Cyclone BTSP-WP400 Bluetooth Bike Speaker with your phone, follow these steps:
1. Make sure the speaker is turned off.
2. Press and hold the POWER button on the speaker for 2-3 seconds until you hear a tone and the LED indicator starts flashing quickly. This puts the speaker in pairing mode.
3. Activate the Bluetooth function on your phone and make sure it is discoverable.
4. On your phone, search for available Bluetooth devices and select "Avantree Cyclone" from the list.
5. Once connected, you will hear a tone indicating that the speaker is paired and the LED indicator will stay blue.
Note: Make sure your phone has Bluetooth enabled and supports the A2DP profile. If your phone does not have Bluetooth or does not support the A2DP profile, you may need to use a Bluetooth audio adapter. Refer to the support.avantree.com website for more information on setting up your phone.
Once paired, the Avantree Cyclone BTSP-WP400 will automatically reconnect to your phone whenever you turn it on again.
If you encounter any issues during the pairing process, refer to the troubleshooting section of the user manual or contact Avantree support for further assistance.
Answer this question
Answers are reviewed before publication.