How do I change the color and brightness settings of the LUXSWAY DY61RF Remote Control Umbrella Light?

To adjust the settings on your LUXSWAY DY61RF Remote Control Umbrella Light, use the included infrared remote control following these steps:

• Power On: Press the ON button to activate the light.
• Adjusting Brightness: Use the DIMMER + and DIMMER - buttons to increase or decrease the light intensity. Some models also feature preset brightness buttons (e.g., 50% or 100%).
• Changing Colors: Press any of the 12 or 16 color-coded buttons on the remote to switch directly to that specific color.
• Dynamic Modes: To cycle through colors automatically, press the FLASH, STROBE, FADE, or SMOOTH buttons.

Note: Ensure the remote is pointed directly at the light's receiver and that the plastic battery insulator tab has been removed from the remote before use. If the light does not respond, check that the AA batteries in the light unit and the CR2025 battery in the remote are properly installed.