How do I adjust the brightness settings on the BIAT GYTDAWG02 LED Head Lamp?
I want to know how to adjust the brightness settings on the BIAT GYTDAWG02 LED Head Lamp. I am not sure how to switch between high and low settings for both the COB and XPE lights. Can you provide step-by-step instructions?
To adjust the brightness settings on the BIAT GYTDAWG02 LED Head Lamp, follow these steps:
1. Power on the headlamp by pressing the power button located on the side of the headlamp. The headlamp will turn on in the default mode.
2. Press the power button again to cycle through the different brightness settings. Each press will switch to the next available mode.
3. The headlamp has six light modes: COB light high, COB light low, XPE high, XPE low, strobe mode, and motion sensor mode.
4. To switch between the COB and XPE lights, continue pressing the power button until you reach the desired light mode. The headlamp will remember the last mode used.
5. The high and low settings refer to the brightness levels of each light mode. Press the power button to toggle between the high and low settings within each mode.
6. Keep pressing the power button until you find the desired brightness setting for your activity.
Note: The specific number of times you need to press the power button to cycle through the modes may vary. Refer to the user manual for any additional information or specific instructions.
Please refer to the user manual for more detailed instructions and illustrations on adjusting the brightness settings of the .
Answer this question
Answers are reviewed before publication.