How do I change the measurement units on the Astro Pneumatic Tool 3018 Digital Tire Inflator?
I want to know how to switch between PSI, BAR, and KGF measurement units on the Astro Pneumatic Tool 3018 Digital Tire Inflator.
To change the measurement units on the Astro Pneumatic Tool 3018 Digital Tire Inflator, follow these steps:
1. Make sure the inflator is turned on by pressing the ON/UNIT/LIGHT button.
2. Press and hold the ON/UNIT/LIGHT button for at least 3 seconds.
3. After 3 seconds, release the button.
4. Press the ON/UNIT/LIGHT button shortly after releasing it to choose the desired unit.
5. The unit chosen will be set as the default for future usage.
Please refer to the product manual for more information and detailed instructions on using the Astro Pneumatic Tool 3018 Digital Tire Inflator.
Answer this question
Answers are reviewed before publication.