How do I install the COOAU M26-US-NEW 1080P FHD Dash Cam in my vehicle?

Accepted answer manuals.plus 2024-12-13 05:52:00

To install the COOAU M26-US-NEW 1080P FHD Dash Cam in your vehicle, please follow these steps:

1. Mounting the Dash Cam:
- Choose a suitable location on your windshield to mount the dash cam. It is recommended to install it behind the rearview mirror for optimal visibility.
- Clean the mounting area with a clean cloth to ensure proper adhesion.
- Peel off the protective film from the adhesive pad on the mount and firmly press the mount onto the windshield.

2. Power Connection:
- Connect the provided power cable to the dash cam's power input port.
- Route the cable along the edge of the windshield and down to the vehicle's power outlet (cigarette lighter socket).
- Plug the other end of the power cable into the vehicle's power outlet.

3. Adjusting the Camera Angle:
- Once the dash cam is powered on, you can adjust the camera angle to your desired position.
- Use the swivel mount to tilt the camera up or down and rotate it left or right for the best view.

4. Powering On and Off:
- The dash cam will automatically power on and start recording when the vehicle's ignition is turned on.
- To manually power on or off the dash cam, press the Power button on the device.

Please refer to the COOAU M26-US-NEW 1080P FHD Dash Cam User Manual for more detailed instructions, including information on menu settings, recording modes, and other features.