How do I set the time and alarms on the Sangean RCR-29 clock radio?
To set the time on the Sangean RCR-29 clock radio, follow these steps:
1. Plug in the AC adapter and turn on the radio.
2. The display will flash the hour digit. Rotate the Tuning control xxxx to select the desired hour, then press the Select button to confirm.
3. The display will flash the minute digits. Rotate the Tuning control xxxx to select the desired minute, then press the Select button to confirm.
4. The year setting on the display will begin flashing. Follow the same steps to set the year, month, and day.
To set the alarms on the Sangean RCR-29 clock radio, follow these steps:
1. Press and hold the Alarm 1 or Alarm 2 button to enter the alarm setting mode.
2. The hour setting of the alarm will begin flashing. Rotate the Tuning control xxxx to select the desired alarm hour, then press the Select button to confirm.
3. The display will show the frequency options for the alarm. Rotate the Tuning control xxxx to select the desired option (ONCE, DAILY, WEEKDAY, WEEKEND), then press the Select button to confirm.
4. Rotate the Tuning control xxxx to choose the required alarm source (RADIO, BUZZER), and then press the Select button to confirm.
Repeat these steps for setting the other alarm. The alarms can be turned on or off by pressing the corresponding alarm button until "ALM ON" or "ALM OFF" is shown on the display.
Answer this question
Answers are reviewed before publication.