How do I change the modes and colors on the Teczero LED Light-up Face Mask?
I just received my Teczero LED Light-up Face Mask and I'm not sure how to switch between the different modes and colors. Can you provide instructions on how to do this?
To change the modes and colors on the Teczero LED Light-up Face Mask, follow these steps:
1. Locate the single button on the controller of the mask.
2. Press the button once to turn on the mask and activate the default mode, which is usually the steady light mode.
3. To switch between the different modes, press the button again. Each press will cycle through the available modes: steady light, slow flash, fast flash, gradient mode, and custom mode.
4. To change the color of the lights, press and hold the button for a few seconds while in any mode. The lights will start cycling through the available colors: red, green, yellow, blue, light blue, pink, and white.
5. Release the button when you reach the desired color.
6. To turn off the mask, press and hold the button for a few seconds until the lights turn off.
Please refer to the Teczero LED Light-up Face Mask user manual for any additional instructions or troubleshooting tips.
Answer this question
Answers are reviewed before publication.