The nozzles are spraying water randomly. How do I stop this?
I recently installed the PureAction SH388 Water Softener Shower Head, but I noticed that the nozzles are spraying water randomly instead of in a consistent pattern. How can I fix this issue?
This issue is usually caused by a high concentration of minerals in your local water, which can lead to clogged nozzles. To resolve this problem, you can try the following steps:
1. Press the nozzle that is spraying water randomly with your finger to release the water build-up. This may help unclog the nozzle and restore the proper water flow.
2. If the problem persists, you can soak the shower head in a bowl filled with vinegar for 2-3 hours. Vinegar helps dissolve mineral deposits. After soaking, reinstall the shower head and let the water flow for 2 minutes to flush out any remaining vinegar.
By following these steps, you should be able to resolve the issue of randomly spraying nozzles and restore a consistent water flow from your PureAction SH388 Water Softener Shower Head.
Answer this question
Answers are reviewed before publication.