How do I connect the Canon PIXMA TS702 printer to my computer?

To connect the Canon PIXMA TS702 printer to your computer, you have multiple connectivity options available. Here's how you can do it:

1. USB Connection:

• Use the USB cable provided with the printer to connect it to your computer.
• Ensure that both the printer and the computer are turned on.
• The computer should automatically recognize the printer and install the necessary drivers. If not, you can download the drivers from the Canon website.

1. Wi-Fi Connection:

• Ensure that your printer is turned on.
• Press the Wi-Fi button on the printer until the Wi-Fi light starts flashing.
• On your computer, go to the Wi-Fi settings and select the network name (SSID) displayed on the printer.
• Enter the Wi-Fi password if prompted.
• Once connected, the Wi-Fi light on the printer will stop flashing and remain lit.

1. Ethernet Connection:

• Connect one end of an Ethernet cable to the printer and the other end to your computer or router.
• Ensure that both the printer and the computer/router are turned on.
• The printer should automatically detect the Ethernet connection and establish a network connection.

For more detailed instructions and troubleshooting tips, please refer to the "Wireless Connection" section in the Canon PIXMA TS702 Single Function Printer Owner's Manual provided above (page 15-18).

Note: The specific steps may vary depending on your computer's operating system and network setup.