How do I connect the Cyber Acoustics CA-2016WB speakers to my computer?
I just purchased the Cyber Acoustics CA-2016WB speakers and I'm not sure how to connect them to my computer. Can you provide step-by-step instructions?
To connect the to your computer, please follow these steps:
1. Make sure the power switch on the speakers is in the off position.
2. Locate the USB port on your computer or a USB hub.
3. Plug in the USB port of the speakers into the USB port on your computer or USB hub.
4. Check that the volume control on the speakers is turned to the minimum position (rotate counterclockwise).
5. Press the power button on the right front panel of the speakers. The "power indicator" light should come on.
6. To test the speakers, play regular audio music on your smartphone or computer.
7. Slowly turn the volume control on the speakers up to your desired listening level. Note that the volume control/mixer in your software should be turned up around 80-85% for optimal volume.
8. If you want to use headphones, you can plug them into the headphone jack on the front of the speaker. The volume control on the speaker will adjust the volume for your headphones.
Please note that the speakers still need to be connected to a USB port for power. If you encounter any issues, refer to the troubleshooting section in the user manual or contact Cyber Acoustics customer support for further assistance.
Answer this question
Answers are reviewed before publication.