How do I connect the Mimio 280 Ultra-Short Throw DLP Projector to my computer?

To connect your Mimio 280 Ultra-Short Throw DLP Projector to your computer, follow these general steps based on standard Mimio projector configurations:

• Identify the Connection Port: Locate the HDMI or VGA ports on the back of the projector and the corresponding output port on your computer.
• Connect the Cable: Plug one end of the cable (HDMI is recommended for high definition) into your computer and the other end into the projector's input port.
• Power On: Turn on the projector first, then turn on your computer.
• Select the Source: Use the projector's remote control or the control panel on the unit to press the Source or Input button. Select the input that matches your cable (e.g., HDMI 1 or VGA).
• Configure Display Settings: On your computer, press Windows Key + P (Windows) or go to System Settings > Displays (Mac) to choose whether to Duplicate or Extend your screen.
• Interactive Connection (Optional): If you intend to use the interactive features of the Mimio projector, you must also connect a USB cable from the projector's USB-B port to a USB-A port on your computer.

Note: If you encounter issues, ensure the cables are securely seated and that your computer's graphics drivers are up to date.