How do I fill the bubble machine with bubble solution?
I just purchased the RockJam BB-AC-2 Light Show Bubble Machine and I'm not sure how to fill it with bubble solution. Can you provide step-by-step instructions?
To fill the RockJam BB-AC-2 Light Show Bubble Machine with bubble solution, please follow these steps:
1. Ensure that the bubble machine is turned off and disconnected from the power source.
2. Locate the bubble solution reservoir on the machine. It is usually located on the top or side of the machine.
3. Unscrew or remove the cap of the bubble solution reservoir to access the opening.
4. Take the provided liter of bubble liquid that comes with the machine or any compatible bubble solution.
5. Carefully pour the bubble solution into the reservoir, ensuring not to overfill it. Be cautious not to spill any solution on the machine or its components.
6. Once the reservoir is filled with the desired amount of bubble solution, securely xxxx or replace the cap to prevent any leakage.
7. Make sure the cap is tightly closed to avoid any bubble solution from leaking during operation.
8. The bubble machine is now ready to use. Plug it into a power source, turn it on, and enjoy the bubble-filled fun!
Please refer to the user manual for any specific instructions or illustrations provided by the manufacturer for your model of the RockJam BB-AC-2 Light Show Bubble Machine.
Answer this question
Answers are reviewed before publication.