How do I connect the IR-9009 receiver to my audio system?
I have unpacked the IR-9009 system and I'm ready to set it up. However, I'm not sure how to connect the receiver to my audio system. Can you provide step-by-step instructions?
To connect the IR-9009 receiver to your audio system, follow these steps:
1. Ensure that the main power switch on the receiver is set to the OFF position.
2. Locate the audio outputs on the back of the receiver. There are three options available: the mixed output, Ch.1 output, and Ch.2 output.
3. If you want to use the mixed output, connect one end of the included 1/4" - 1/4" patch cable to the 1/4" output jack labeled "MIXED" on the back of the receiver.
4. Connect the other end of the 1/4" - 1/4" patch cable to the desired microphone input on your mixer or sound system.
5. If you prefer to use the individual channel outputs, repeat steps 3 and 4 for the Ch.1 and Ch.2 output jacks.
6. Once the connections are made, ensure that the main power switch on the receiver is still in the OFF position.
7. Turn on your audio system and adjust the volume levels accordingly.
By following these steps, you should be able to connect the IR-9009 receiver to your audio system and start enjoying wireless microphone performance. For more detailed instructions and illustrations, please refer to the owner's manual provided with the product.
Answer this question
Answers are reviewed before publication.