How do I select the appropriate timer setting on the Wisdompark X9MAX 220W LED Nail Lamp?

To select the appropriate timer setting on the Wisdompark X9MAX 220W LED Nail Lamp, follow these steps:

1. Refer to the instructions provided by the gel polish manufacturer. They usually recommend specific curing times for their products.
2. The lamp offers four timer settings: 10s, 30s, 60s, and 99s. Here's a general guideline for selecting the timer setting:

• 10s: This short curing time is suitable for thin layers of gel polish or for a quick touch-up. It may not fully cure thicker layers.
• 30s: This is the most commonly used timer setting for most gel polishes. It provides sufficient curing for most applications.
• 60s: If you're using a thicker layer of gel polish or if you want to ensure thorough curing, the 60s timer setting is recommended.
• 99s: The 99s low heat mode is designed for painless curing and gradually increasing power. It's suitable for sensitive nails or for curing hard gel extensions.

1. Experiment with different timer settings to find the optimal curing time for your specific gel polish. Start with the recommended time provided by the manufacturer and adjust as needed based on your results.

Remember to always follow the gel polish manufacturer's instructions for the best results.