How to connect my Bluetooth-enabled device to speaker in Hansong DC117-57 Wireless Charging Speaker Makeup Mirror?

To connect your Bluetooth-enabled device to the speaker in the Hansong DC117-57 Wireless Charging Speaker Makeup Mirror, please follow these steps:

1. Ensure that the Bluetooth speaker is in pairing mode. You can activate pairing mode by referring to the user manual for specific instructions.
2. Make sure that the Bluetooth-enabled device you want to pair is within range of the speaker and has Bluetooth turned on.
3. Check if there are any other Bluetooth devices connected to the speaker. If there are, disconnect them to avoid interference.
4. Restart both the speaker and the Bluetooth-enabled device.
5. On your Bluetooth-enabled device, go to the Bluetooth settings menu and search for available devices.
6. Select the Hansong DC117-57 Wireless Charging Speaker Makeup Mirror from the list of available devices.
7. If prompted, enter the necessary passcode or PIN to complete the pairing process.
8. Once the pairing is successful, you should hear a confirmation sound or see a notification on your device.

If you are still experiencing difficulties with pairing, you can try resetting the speaker to factory settings and repeat the pairing process. Refer to the user manual for instructions on how to reset the speaker.

Please note that the specific steps may vary slightly depending on the device you are trying to connect. If you encounter any further issues, it is recommended to consult the user manual or contact customer support for further assistance.