Questions manuals.plus asks 2024-07-12 13:58:00

How do I change the lighting modes on the EverBrite E011151 Ultra Bright Tactical Flashlight?

I am not sure how to switch between the different lighting modes on the flashlight. Can you provide step-by-step instructions?

Accepted answer manuals.plus 2024-07-12 13:58:00

To change the lighting modes on the EverBrite E011151 Ultra Bright Tactical Flashlight, follow these steps:

  1. Press the power button on the flashlight to turn it on.
  2. Once the flashlight is turned on, press the power button again to cycle through the different lighting modes.
  3. The flashlight has four lighting modes: High, Medium, Low, and Strobe. Each press of the power button will switch to the next mode in the sequence.
  4. Choose the desired lighting mode by pressing the power button until you reach the desired mode.
  5. To turn off the flashlight, press and hold the power button for a few seconds until the light turns off.

Note: The specific order of the lighting modes may vary depending on the flashlight's firmware. Please refer to the user manual for any additional instructions or variations specific to your model.

E011151EverBriteTactical FlashlightUltra Bright
Open related manual Ask another question
What is the battery life of the EverBrite E011151 at 600 lumens? 1 answer • The manual for the EverBrite E011151 indicates a maximum runtime of up to 75 hours when using 3C alkaline batteries. However, it...

Answer this question

Answers are reviewed before publication.