How do I assemble the Ambimall RPT-ZGB10101 Simple Design Floor Lamp?

To assemble the Ambimall RPT-ZGB10101 Simple Design Floor Lamp, please follow the provided assembly instructions included in the package. Here is a step-by-step guide:

1. Unbox all the components of the floor lamp and lay them out on a flat surface.
2. Take the lamp pole and insert it into the lamp base, ensuring a secure fit.
3. Attach the lampshade to the top of the lamp pole, aligning the holes on the shade with the corresponding pegs on the pole.
4. Gently push down on the shade until it is securely attached.
5. If applicable, insert the included bulb into the lamp socket, following the instructions provided with the bulb.
6. Plug the lamp into a power source.
7. Turn on the lamp using the push-button switch located on the lamp base or pole.
8. Adjust the lamp's height and angle as desired to achieve the desired lighting effect.

Note: No tools are required for the assembly of the Ambimall RPT-ZGB10101 Simple Design Floor Lamp. The assembly process should take approximately 10 minutes.