How do I calibrate the Famidoc FDTH-V0-22 Baby Bath Thermometer?

To calibrate the Famidoc FDTH-V0-22 Baby Bath Thermometer, please follow the steps below:

1. Fill a container with water and add ice cubes to make it cold or warm water to make it hot, depending on the calibration you want to perform.
2. Stir the water to ensure an even temperature throughout.
3. Place the thermometer in the water, making sure the probe is fully submerged.
4. Wait for the temperature reading to stabilize on the LCD screen. This may take a few seconds.
5. Compare the reading on the thermometer with the known temperature of the water. If there is a significant difference, you may need to calibrate the thermometer.
6. Look for a calibration button or option on the thermometer. Refer to the user manual for specific instructions on how to access the calibration function.
7. Follow the instructions provided in the user manual to adjust the thermometer's reading to match the known temperature. This may involve pressing buttons or using a calibration tool.
8. After calibrating, repeat the process with different water temperatures to ensure accurate readings across a range of temperatures.

Note: If you are unable to find a calibration option or if calibrating does not resolve the accuracy issue, please contact Famidoc's customer support for further assistance.