How do I set up the BG ELECTRICAL N300 Wi-Fi Socket Range Extender?

To set up the BG ELECTRICAL N300 Wi-Fi Socket Range Extender, follow these steps:

1. Positioning Your Wi-Fi Socket:

• Place the Wi-Fi socket halfway between your router and the Wi-Fi dead-zone.
• Use the signal strength indicator on your mobile device to determine the mid-signal point.
• Choose a location away from Bluetooth devices and other household electronics to minimize signal interference.

1. Wiring Instructions:

• Power off before commencing work and always isolate the power at the consumer unit/fuse box.
• If replacing an existing socket, unscrew the socket from the wall/mounting box.
• Note the cable connections and unscrew each terminal to release the wires.
• Connect the wires to the appropriate terminals on the Wi-Fi socket.

1. USB Charger Information:

• The USB port on the product can charge mobile devices such as mobile phones, MP3 players, and tablets.
• The USB output is 5.0V DC 2.1A, 10.5W MAX.

1. Wi-Fi Socket Setup Instructions:

• Ensure that your Wi-Fi socket is connected to the power supply.
• After the initial power up, the LED indicator will illuminate with a solid blue light.
• Proceed with your preferred method of connection: web browser, QR code, or WPS (Wi-Fi Protected Setup).

For detailed step-by-step instructions and troubleshooting, please refer to the BG ELECTRICAL N300 Wi-Fi Socket Range Extender Instruction Manual provided.