How do I set up the CenturyLink C4000 Wi-Fi 6-Router Modem?

To set up the CenturyLink C4000 Wi-Fi 6-Router Modem, follow these steps:

1. Connect the modem to your computer or device using an Ethernet cable.
2. Plug the power adapter into the modem and connect it to a power outlet.
3. Wait for the modem to power on and establish a connection. This may take a few minutes.
4. Open a web browser on your computer or device and enter the default IP address of the modem (usually 192.168.0.1 or 192.168.1.1) into the address bar.
5. You will be prompted to enter a username and password. Refer to the user manual or the modem label for the default login credentials.
6. Once logged in, you will be guided through the setup wizard. Follow the on-screen instructions to configure your internet connection settings, including entering your CenturyLink account information if required.
7. After completing the setup wizard, you can customize your Wi-Fi network settings, such as changing the network name (SSID) and password.
8. Save your settings and restart the modem if prompted.

Note: It is recommended to consult the user manual for detailed instructions and troubleshooting tips specific to your modem model.