How do I connect my BAUHN H3 LED projector to my computer?

To connect your BAUHN H3 LED projector to your computer, please follow these steps:

1. Make sure both your projector and computer are turned off.
2. Locate the VGA input port on the back of the projector.
3. Connect one end of the VGA cable to the VGA output port on your computer.
4. Connect the other end of the VGA cable to the VGA input port on the projector.
5. Turn on your computer and the projector.
6. On the projector remote control, press the "Source" button and select "VGA Input" as the input source.
7. Your computer screen should now be displayed on the projector. You may need to adjust the screen resolution on your computer to match the projector's native resolution for the best image quality.

Please note that if your computer does not have a VGA output port, you may need to use an appropriate adapter or cable to connect it to the projector's VGA input port. Refer to your computer's user manual or contact the manufacturer for more information on connecting external displays.