Questions manuals.plus asks 2024-02-21 08:17:00

How do I pair the JBL Flip 6 with my Bluetooth-enabled device?

Accepted answer manuals.plus 2024-02-21 08:25:00

To pair the JBL Flip 6 with your Bluetooth-enabled device, follow these steps:

  1. Turn on Bluetooth on your device and make sure it is enabled.
  2. Press and hold down the power button on the JBL Flip 6 for 3 seconds until you see "Pairing" on the LED display.
  3. On your device, search for available Bluetooth devices and select "JBL Flip 6" from the list of available devices.
  4. If prompted for a PIN code, enter "0000" (four zeros).
  5. Once connected, you can play music from your device through the JBL Flip 6.

For more detailed instructions, please refer to the "Bluetooth Pairing" section in the JBL Flip 6 Manual.

Flip 6JBLPortableSpeakerWaterproof
Open related manual Ask another question
How to set up two JBL Flip 6 speakers for stereo mode with clear left-right sound separation? 1 answer • Yes, it is possible to use two JBL Flip 6 speakers to create a stereo pair with clear left and right channel... How can I connect the JBL Flip 6 to a car stereo if it lacks a 3.5 mm aux output? 1 answer • There is a contradiction in the provided FAQ section that requires clarification. While one part of the guide suggests you can connect... What should I do if my JBL Flip 6 got wet and is now beeping and not working correctly? 1 answer • Hello. It sounds like the USB-C charging protection feature on your JBL Flip 6 has been activated. The JBL Flip 6 is...

Answer this question

Answers are reviewed before publication.