How do I set up the TP-Link AC750 Wi-Fi Range Extender (RE200)?

Sure! Here's a step-by-step guide to set up the TP-Link AC750 Wi-Fi Range Extender (RE200):

1. Power On: Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on.
2. Set-Up: There are three methods to set up the extender:

a. Via the Tether App: Download the Tether app from the Apple App Store or Google Play. Launch the app, log in with your TP-Link ID (create one if you don't have it), tap the + button, and select Range Extender. Follow the app instructions to complete the setup.

b. Via a Web Browser: Connect your computer or smartphone to the extender's network (TP-Link_Extender). Open a web browser and enter "http://tplinkrepeater.net" or "http://192.168.0.254" in the address bar. Create a password to log in and follow the web instructions to complete the setup.

c. Via the WPS Button: Press the WPS button on your router. If the extender connects to a dual-band router, repeat the steps to connect to the other band. Within 2 minutes, press the WPS button on the extender for 1 second. The LED should change from blinking to solid, indicating a successful connection.

1. Relocate: Plug the extender about halfway between your router and the Wi-Fi dead zone. Wait for about 2 minutes until the LED turns solid blue. If it doesn't, relocate the extender closer to the router for better signal quality.
2. Enjoy the internet! Once the setup is complete, you can manage the extender using the Tether app or a web browser.

For more detailed instructions and troubleshooting, you can refer to the TP-Link AC750 Wi-Fi Range Extender (RE200) Installation Guide, which can be found at https://www.tp-link.com/support/downl...

Note: The information provided here is a summary. Please refer to the official manual for complete and accurate instructions.