How do I adjust the height of the handgrips on the drive RTL10266WT Nitro Rollator?

To adjust the height of the handgrips on the drive RTL10266WT Nitro Rollator, follow these steps:

1. Locate the red release buttons for the handgrips below the handles.
2. Press the red release buttons and pull the handgrip upwards at the same time.
3. As the handle moves, release the button. This will automatically lock the handgrip at the next possible height.
4. Repeat this process until the desired height is reached.

Please refer to figure 3 in the owner's manual for a visual representation of the height adjustment process.

Note: It is important to ensure that both handgrips are adjusted to the same height for optimal stability and comfort while using the Nitro Rollator.