User Manual Q&AAnswer
Dec 19, 2025 - 11:10 PM
To set up a new project in FOXTECH gAirhawk Software 4.8 Version, follow these steps:
1. **Software Installation:** Install the gAirhawk software on your desktop and double-click the gAirhawk icon to enter the interface.
2. **Create a New Project:**
- Click on the File icon and select New Project.
- Enter the name of the file and save it in the same location.
- Load data by clicking on GNSS Base, GNSS Rover, Lidar File, and Img (if applicable).
- Input coordinates if base station coordinate is required or select approximate coordinates.
3. **Set the Coordinate System:**
- Click on the Tools bar and select Coordinate System.
- Create a new coordinate system (e.g., WGS 84) and set parameters for the ellipsoid.
- Save the setting.
4. **Set the Parameters:**
- Configure parameters for FOV, distance, intensity, and echo based on your requirements.
5. **Divide Strip:**
- Click on the Divide Strip Bar to open the trajectory dialogue.
- Choose the strips according to your requirements by selecting only straight strips and removing radius parts.
6. **Additional Notes:**
- Ensure that necessary data files (base data, POS data, lidar data, image folder) are ready before running the software.
- Follow specific instructions for adding GNSS Rover data, Lidar files, and Img (for LiDAR systems with a camera).
- Save the project after processing data and color point cloud output.
- Review LAS files and use third-party software for further procedures.
By following these steps, users can effectively set up a new project in FOXTECH gAirhawk Software 4.8 Version for GNSS differential data processing.
Add New Comment