User Manual Q&AAnswer
Dec 18, 2025 - 01:53 PM
To connect and use the Surenoo SSP0220AA3-240320 SPI TFT LCD Module with an Arduino or other microcontrollers, follow these steps:
1. **Wiring Instructions for Arduino:**
- Connect the module pins to the corresponding Arduino pins as per the provided wiring instructions.
- Use the provided Arduino test program and libraries to interface with the module.
2. **Operating Steps for Arduino:**
- Follow the steps outlined in the user manual to run the SPI module on the Arduino.
- Copy the dependent libraries to the Arduino project directory if needed.
- Compile and download the selected example from the test package to the Arduino.
3. **Wiring Instructions for Other Microcontrollers (C51, STM32):**
- Connect the module pins to the corresponding microcontroller pins as per the provided wiring instructions.
4. **Operating Steps for Other Microcontrollers:**
- Select the appropriate test program for the microcontroller model.
- Compile and download the selected test program to the microcontroller.
5. **Software Description:**
- Understand the code architecture for Arduino, C51, and STM32 platforms.
- Differentiate between software SPI and hardware SPI communication methods.
- Implement SPI communication code based on the provided examples.
6. **Common Software:**
- Use modulo software like Image2Lcd or PCtoLCD2002 for displaying Chinese, English, symbols, and pictures on the module.
By following these steps and guidelines provided in the user manual, you can successfully connect and utilize the Surenoo SSP0220AA3-240320 SPI TFT LCD Module with various microcontrollers for your projects.
Add New Comment