User Manual Q&AAnswer
Dec 18, 2025 - 11:54 AM
To adjust the temperature settings on your INSTAT 468931003472-8 Programmable RF Wireless Radio Room Thermostat, follow these steps based on the manual provided:
1. **Automatic Mode (AUTO):**
- In this mode, the room temperature is automatically controlled according to the pre-set program.
- The pointer indicates the mode is set to AUTO.
- The number at the bottom right indicates the program event during the day.
2. **Temperature Override (Short Period):**
- While in AUTO mode, you can override the existing temperature setting for a short period of time.
- Press the + or - buttons to change the temperature setting.
- The pointer indicates both AUTO and MAN during the override.
3. **Manual Operation (Constant Room Temperature):**
- In this mode, a constant temperature can be set, and the pre-set program is ignored.
- Press the < button until the pointer indicates MAN.
- Set the temperature by pressing the + / - buttons.
- Exit the mode by pressing the > button.
4. **Holiday/Party Mode (Set Temperature for a Set Time):**
- This mode allows you to set the temperature for periods ranging from a few hours up to 199 days.
- Press the < button until the pointer indicates the suitcase icon.
- Set the time and temperature using the + / - and > buttons.
- Once set, the temperature will flash for 10 seconds before starting the holiday/party period.
By following these instructions, you should be able to adjust the temperature settings on your thermostat for different modes and time periods. If you encounter any specific issues or need further assistance, refer to the detailed instructions provided in the manual for troubleshooting steps.
Add New Comment