User Manual Q&AAnswer
Dec 17, 2025 - 08:53 AM
To set up and operate the PPI ScanLog 4 Channel Universal Process Data Logger with PC Software, follow these steps:
1. **Power-Up and Basic Operation:**
- Upon power-up, the display will show the instrument's model name and hardware & firmware version. After this, the device enters run mode for normal operation.
- The main screen displays calendar date, channel names, measured process values, alarm indicator, and clock time.
- You can scroll through different screens using the scroll key to view channel names, recording information, and record view screens.
2. **Front Panel Layout and Operation:**
- The front panel includes a monochrome graphic LCD display and membrane keys.
- Use the scroll key to navigate through screens, alarm acknowledge key to mute alarms, and other keys for parameter adjustments.
- The set-up key allows you to enter or exit set-up mode, and the enter key is used to store parameter values.
3. **Operator Parameters and Alarm Settings:**
- Operator parameters include batch recording commands and balance slot time settings.
- Alarm settings allow you to configure alarm types, setpoints, hysteresis, and inhibit options for each channel.
4. **Supervisory Configuration and Device Settings:**
- Supervisory configuration parameters are protected by a password and include device, channel, alarm, recorder, RTC settings, and utilities.
- Device configuration allows you to delete records and assign a unique ID number to the device.
- Channel configuration lets you set common parameters for all channels or configure individual channel settings.
5. **Electrical Connections and Alarm Outputs:**
- Follow the provided electrical connection diagram for proper wiring of input channels, alarm outputs, excitation voltages, and communication ports.
- Ensure correct connections to avoid damage and follow safety precautions during installation.
By following these steps and referring to the user manual for detailed instructions, you can effectively set up, operate, and configure the PPI ScanLog 4 Channel Universal Process Data Logger with PC Software.
Add New Comment