User Manual Q&AAnswer
Dec 16, 2025 - 01:47 AM
To install a microSD card in the Zebra TC73 touch computer, follow these steps as outlined in the user manual:
1. **Lift the access door:** Locate the microSD card slot under the battery pack and lift the access door covering the slot.
2. **Slide the microSD card holder to the Open position:** Move the microSD card holder to the Open position to prepare for inserting the card.
3. **Lift the microSD card holder door:** Lift the door of the microSD card holder to create space for inserting the card.
4. **Insert the microSD card:** Carefully insert the microSD card into the card holder, ensuring that it slides into the holding tabs on each side of the door.
5. **Close the microSD card holder door:** Once the card is securely in place, close the microSD card holder door to secure it.
6. **Slide the microSD card holder door to the Lock position:** Ensure the door is securely locked in place by sliding it to the Lock position. The access door must be replaced and securely seated to maintain proper device sealing.
7. **Re-install the access door:** Finally, re-install the access door covering the microSD card slot to complete the installation process.
Remember to follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. It's essential to handle the card carefully and ensure it is inserted correctly to prevent any issues with storage expansion on your Zebra TC73 touch computer.
Add New Comment