User Manual Q&AAnswer
Dec 12, 2025 - 05:08 PM
To verify if the network adapter card is properly installed and working on your Windows computer, follow these steps:
1. **Navigate to the Device Manager:**
- Click on the Windows Start menu and type "Device Manager" in the search bar.
- Click on the Device Manager option that appears in the search results.
2. **Check Network Adapters:**
- In the Device Manager window, locate and expand the "Network Adapters" category.
- Look for the entry labeled "Intel Ethernet Controller I225-V" (this may vary slightly based on the specific model).
3. **Confirm Driver Installation:**
- Right-click on the "Intel Ethernet Controller I225-V" entry.
- Select the "Properties" option from the context menu.
- In the Properties window, navigate to the "Driver" tab.
- Confirm that the driver is installed and working correctly. You should see information about the driver version and status.
If you see the driver information and no error messages, it indicates that the network adapter card is installed and functioning as expected on your Windows computer.
For further troubleshooting or assistance, refer to the user manual or contact support for additional guidance.
Add New Comment