User Manual Q&AAnswer
Dec 10, 2025 - 11:23 PM
If your labels are not aligning correctly when printing with the HP KE200 Label Printer, follow these troubleshooting steps:
1. **Check Label Orientation:** Ensure that the printing side of the label roll is facing up when installing the label roll into the printer. Incorrect orientation can lead to alignment issues.
2. **Adjust Label Size:** By default, the printer may be set to print on 8.5" x 11" labels. Make sure to adjust the label size settings on your printing platform according to the actual label size you are using.
3. **Manually Align Labels:** If the labels do not align automatically after closing the printer cover, you can press the feed button on the printer to manually align the labels.
4. **Clean Printer Components:** Regularly clean the printer head and ensure that the rubber components inside the printer are clean. Use an alcohol swab for cleaning and allow the area to dry before turning on the printer.
5. **Check for Jams:** If the labels are still not aligning properly, check for any paper jams. If there is a jam, turn off the printer, allow the printer head to cool down, and carefully remove the jammed paper before attempting to print again.
By following these steps, you should be able to troubleshoot and resolve alignment issues with your HP KE200 Label Printer. If the problem persists, refer to the maintenance section in the user guide or contact HP customer service for further assistance.
Add New Comment