User Manual Q&AAnswer
Dec 10, 2025 - 10:25 AM
To switch between connected devices using the Lindy 2 Port Type C, DisplayPort 1.2 KVM Switch, you can follow these steps:
1. **Front Panel Switching:** You can manually switch between connected devices using the push button on the front panel of the KVM switch. Press the SELECT button to change the input source. The port status LEDs will indicate which input port is currently selected.
2. **Auto-Switching:** The KVM switch also supports auto-switching. If there is only one active source connected, the unit will automatically switch to that port without requiring manual intervention.
3. **Recommended Cables:** It is suggested to use the included USB Type C 3.2 Gen 2x2 E-marked 0.5m cables for optimal performance. Additionally, ensure that the DisplayPort cable used is not longer than 3m to maintain stable video signal.
By following these steps, you can easily switch between connected Type C devices using the Lindy 2 Port Type C, DisplayPort 1.2 KVM Switch for seamless control over your devices.
Add New Comment