User Manual Q&AAnswer
Dec 09, 2025 - 05:04 PM
According to the product manual, the replaceability of the light source or operating device in the Paulmann 705.31 MaxLED 1000 LED Strip depends on the variant you have. Here are the details:
1. **Replaceability Categories:**
- **Category 1:** If you have variant 705.31 or 705.32, you can replace (1) light source or (4) operating device by yourself without permanently damaging the luminaire.
- **Category 2:** If you have variant 705.31 or 705.32, a qualified electrician can replace (2) light source or (5) operating device without permanently damaging the luminaire.
- **Category 3:** If you have variant 705.33, the light source or operating device is not replaceable, and the entire luminaire must be replaced.
2. **Replacement Process:**
- For Category 1 replacements, you can safely replace the light source or operating device yourself without causing permanent damage to the luminaire.
- For Category 2 replacements, it is recommended to have a qualified electrician perform the replacement to ensure proper installation and safety.
- For Category 3, where the light source or operating device is not replaceable, the entire luminaire needs to be replaced.
3. **Further Assistance:**
- If you need more specific guidance on replacing the light source or operating device in your Paulmann 705.31 MaxLED 1000 LED Strip, you can refer to the product manual or contact Paulmann Licht GmbH directly through their website at www.paulmann.com for additional support and information.
By following these guidelines based on the product manual, you can determine the replaceability of components in your specific variant of the Paulmann 705.31 MaxLED 1000 LED Strip and take appropriate action accordingly.
Add New Comment