How can I set up parallel compression using the SSL Bus Compressor 2 plug-in? (Solid State Logic Bus Compressor User Guide)

Answer

manuals.plus

Dec 09, 2025 - 03:26 PM

To set up parallel compression using the SSL Bus Compressor 2 plug-in, follow these steps based on the information provided in the user guide:

1. **Understanding Mix Control**: The Mix control on the SSL Bus Compressor 2 plug-in allows you to blend the processed (wet) and unprocessed (dry) signals. This blending technique is commonly referred to as parallel compression.

2. **Adjusting the Mix Control**:

- Set the Mix control to a value between 0 and 100%.

- A Mix control value of 0% means you are only hearing the unprocessed (dry) signal.

- A Mix control value of 100% means you are only hearing the processed (wet) signal.

- Adjust the Mix control to find the desired balance between the compressed and uncompressed signals.

3. **Experimenting with Parallel Compression**:

- Start by setting the Mix control to around 50% to hear a blend of both the compressed and uncompressed signals.

- Listen to how parallel compression affects the overall sound and dynamics of your mix.

- Adjust the Mix control to fine-tune the amount of compression applied in parallel.

4. **Benefits of Parallel Compression**:

- Parallel compression can help retain the dynamic integrity of your mix while adding the desired level of compression.

- It allows you to achieve a more controlled sound without completely sacrificing the original dynamics of the mix.

By following these steps and experimenting with the Mix control on the SSL Bus Compressor 2 plug-in, you can effectively set up parallel compression to enhance your mixes.