User Manual Q&AAnswer
Dec 09, 2025 - 02:32 PM
To connect and set up the AUDIO DSPAI35 4 Channel Amplifier for optimal performance, follow these steps based on the information provided in the instruction manual:
1. **Power Supply:**
- Ensure the voltage supplied to the amplifier is within the range of 11 - 15 VDC.
- Note the idling current and remote voltage requirements for proper functioning.
2. **Connection:**
- Connect the amplifier to a power source within the specified voltage range.
- Use the provided USB connector to connect the amplifier to a personal computer for configuration.
3. **Panel Controls and Features:**
- Utilize the various connectors and controls on the amplifier panel, such as the BT connector, low level input/output, USB connector, bass remote jack, high level output, and auto tuning microphone input.
- Make use of the auto turn on/off switch for convenience.
4. **GUI Operation:**
- Double click the DSP icon to access the graphical user interface (GUI).
- Use the GUI to adjust settings such as crossover (HP/LP), volume, delay, EQ, and auto tuning for optimal sound quality.
5. **Parameters:**
- Pay attention to power output specifications, signal stage details, input/output stage configurations, and crossover settings for accurate setup.
6. **Troubleshooting and Support:**
- If you encounter any issues during setup or operation, refer to the troubleshooting section of the user manual for guidance.
- For further assistance or clarification on product usage, contact customer support.
By following these steps and referring to the provided information in the instruction manual, you can effectively connect and set up the AUDIO DSPAI35 4 Channel Amplifier for an enhanced audio experience.
Add New Comment