User Manual Q&AAnswer
Dec 09, 2025 - 11:50 AM
To connect the Extech HDV7C-A2-45-15 Two Way Articulating Camera Probe to the HDV700 VideoScope monitor, follow these steps as outlined in the user manual:
1. **Turn off the HDV700 power:** Before connecting the probe, ensure that the power to the HDV700 monitor is switched off to prevent any electrical issues.
2. **Align the white dots:** Align the white dot on the probe connector with the white dot on the monitor connector for proper alignment.
3. **Plug the probe into the monitor unit:** Insert the probe into the monitor unit, ensuring full insertion and proper alignment of the connector.
4. **Tighten the collar nut:** Secure the connection by tightening the collar nut. Be cautious not to overtighten to avoid damaging the components.
It is essential to follow these steps carefully to establish a reliable connection between the camera probe and the monitor for effective operation and image display.
Add New Comment