User Manual Q&AAnswer
Dec 09, 2025 - 09:29 AM
To access the camera's web interface for viewing live video and configuration, follow these steps as per the installation guide:
1. Install and execute the "Device Config Tool" on a computer connected to the same network as the camera.
2. Press the "Search" button within the tool. This will search for IP cameras connected to the same router on the network. The default IP address is 192.168.1.168.
3. Once the search is complete, click on the camera IP or manually type the IP address using Internet Explorer.
4. Input "admin" for the user ID and password. If this is your first time logging in, you will be prompted to set a new password.
5. If you forget the password, you can reset it by holding the RESET button on the camera for about 10 seconds and reloading the "Device Config Tool."
6. To access the camera's web interface, you may need to download and install the Active-X web plugin.
7. After installation, you will be able to view live camera video and make necessary configurations through the web interface.
By following these steps, you should be able to access the camera's web interface successfully for live viewing and configuration.
Add New Comment