User Manual Q&AAnswer
Dec 09, 2025 - 02:01 AM
To determine if your Midmark M9 Steam Sterilizer is compatible with the Data Logger installation process, you need to follow these steps:
1. **Identify Sterilizer Model:** Use images provided in the user manual to identify the model of your sterilizer. The Data Logger is compatible with the following models: M9 (-020 /-021 /-022), M9 (-033 /-034), M9 (-040 /-041 /-042 /-043), M9D (-020 /-022 /-042), M11 (-020 /-021 /-022), M11 (-033 /-034), and M11 (-040 /-041 /-042 /-043). If you have an -04X model sterilizer, proceed to step 5.
2. **Verify Software Version:** For -02X model sterilizers, ensure that the operating software version is between 1.0.3 to 1.0.4 for compatibility with the Data Logger. Cycle the power on the unit to display the software version during the start-up cycle.
3. **Install Harness (for -02X/-03X models only):** If required, remove the right side cover, remove any existing harness, install the new harness by routing the black connector down through the hole in the top cover, attach the black connector to the top of the main PC board, and then reinstall the right side cover.
By following these steps, you can determine if your Midmark M9 Steam Sterilizer is compatible with the Data Logger installation process. If you encounter any issues or have further questions, it is recommended to contact your Midmark representative for assistance.
Add New Comment